Infocus lp920 参考指南
14
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Connecting a Computer with an RS-232 Cable
You can control the projector from an LCD control panel by con-
necting an RS-232 cable to the projector (see Figure 8 on page 10).
See “RS232 Terminal Specifications” on page 59 for details.
necting an RS-232 cable to the projector (see Figure 8 on page 10).
See “RS232 Terminal Specifications” on page 59 for details.
Connecting a Video Player
See “Optional Accessories” on page 50 to order video cables.
There are 3 video inputs: Composite video, S-video, and Compo-
nent video. For Composite and S-video, follow these instructions:
There are 3 video inputs: Composite video, S-video, and Compo-
nent video. For Composite and S-video, follow these instructions:
NOTE: HDTV sources are
connected to the projector using
the computer inputs, not the video
inputs. All analog computer inputs
can display HDTV. See the
previous pages for computer
connection instructions.
1
Plug the A/V cable’s yellow connector into the “video-out”
connector on your video player (Figure 11). This connector
may be labeled “To Monitor.”
connector on your video player (Figure 11). This connector
may be labeled “To Monitor.”
•
If you’re using an S-video cable, connect it to the “S-video
out” connector on the video player (Figure 12).
out” connector on the video player (Figure 12).
2
Plug the other yellow connector into the composite video con-
nector
nector
on the projector.
•
If you’re using S-video, plug the other end of the cable into
the “S-video” connector
the “S-video” connector
on the projector (Figure 12).
F
IGURE
11
Connecting the projector to a video player using the standard A/V cable
L
L
In
out
In
In
L
BNC
BNC
R
R
R
A
0
A
0
R
s
R
G
G
B
B
A/V cable