ICOM IC-7000 说明手册
■
Memory channel selection
8
100
MEMORY OPERATION
The transceiver has 501 memory channels including 6
scan edge channels (3 pairs), and 2 call channels. In
addition, a total of 5 memory banks (99 memory chan-
nel each), A to E, are available for usage by group, etc.
scan edge channels (3 pairs), and 2 call channels. In
addition, a total of 5 memory banks (99 memory chan-
nel each), A to E, are available for usage by group, etc.
Memory mode is very useful for quickly changing to
often-used frequencies.
often-used frequencies.
All 503 memory/call channels are tuneable which
means the programmed frequency can be tuned tem-
porarily with
means the programmed frequency can be tuned tem-
porarily with
[DIAL]
, etc., in memory mode.
MEMORY
CHANNEL
MEMORY
CHANNEL
NUMBER
CAPABILITY
TRANSFER
TO VFO
OVER-
WRITING
CLEAR
Regular
(split memory)
1–99
(in each
banks)
Independent transmit and receive
frequencies and one mode in each
memory channel.
In addition, tone frequencies can
also be stored for repeater use.
frequencies and one mode in each
memory channel.
In addition, tone frequencies can
also be stored for repeater use.
Yes
Yes
Yes
Scan edges
1A–3B
(common)
One frequency and one mode in
each memory channel as scan
edges for programmed scan.
each memory channel as scan
edges for programmed scan.
Yes
Yes
No
Call channels
(split memory)
C1, C2
(common)
Same as regular channels, but only
frequencies in 144 MHz (C1), 430
MHz (C2) band can be programmed.
frequencies in 144 MHz (C1), 430
MHz (C2) band can be programmed.
Yes
Yes
No
■
Memory channels
q Push
[PBT/M-ch/RIT]
momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•
[PBT/M-ch/RIT]
indicator (Green) goes out.
w Select M
M--2
2.
e Push
[F-4
V
V/
/M
M
]
to select memory mode.
r Rotate
[M-ch]
(inner) control to select the desired
memory channel.
• All memory channels including blank channels can be
selected.
• Rotating
[RIT]
(outer) control changes the bank.
•
[
Y
Y
]
/
[
Z
Z
]
on the microphone also change the channels.
t To return to VFO mode, push
[F-4
V
V/
/M
M
]
again.
[EXAMPLE]: Selecting memory channel 17.
V/M
[MENU/GRP]
[F-4]
[RIT] (outer) control
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
• Push and hold
[MENU/GRP]
for 1 sec. once or twice
to select the menu group M
M.
• Push
[MENU/GRP]
momentarily one or more times to
select the menu M
M--2
2.
7
8