ICOM IC-7000 说明手册

3

1

PANEL DESCRIPTION

!0

(p. 81)

➥Push momentarily to turn the manual notch func-

tion ON and OFF in SSB, CW and AM modes.

• “

” appears on the display when the function is ac-

tivated.

➥Push and hold for 1 sec. to enter the manual

notch filter set mode.

✔

The notch function is a narrow DSP filter that removes inter-
fering tones from CW or AM signals while preserving the de-
sired signal's frequency response. 

!1

•

➥Push momentarily to turn the auto notch function

(ANF) ON and OFF in SSB, AM, FM modes. 
(p. 80)

• “

” appears on the display when the function is ac-

tivated.

➥Push and hold for 1 sec. to record the received

signal’s audio. (p. 93)

!2

➥Push momentarily to have the frequency, etc. an-

nounced by the speech synthesizer. (p. 34)

• The parameters to be announced can be selected in

the miscellaneous (others) set mode. (pgs. 131, 132)

➥Push and hold for 1 sec. to toggle the dial lock

function ON and OFF. (p. 37)

• The dial lock function electronically locks the main

dial.

• “

” appears while the dial lock function is active.

!3

(p. 10)

Modular-type microphone connector—accepts the
supplied microphone (HM-151).

• The optional OPC-589 can be used to connect an 8-pin

microphone such as the SM-20, if desired.

• A microphone connector is also available on the rear

panel. DO NOT connect 2 microphones simultaneously.

!4

Y

Z

Z

➥Push momentarily to select a frequency band.

➥Push and hold 

Y

for 1 sec. to toggle the

simple band scope display ON and OFF.

➥Push and hold 

Z

for 1 sec. to toggle the

multi-function meter display ON and OFF.

!5

Selects the main dial drag.

• Three positions are available. The upper setting turns on

clicks as the dial is turned.

!6

(p. 18)

Accepts headphones with 8–16 Ω impedance.

• When headphones are connected, no receive audio

comes from the speaker.

• When the PHONES/SPEAKER switch on the back of the

front panel is set to the 

position, an external

speaker can be used instead of headphones. This is
convenient for mobile or outdoor operation.

!7

Changes the displayed frequency and selects val-
ues for selected set mode items, etc.

!8

➥

: Lights green in receive mode and when

squelch is open.

➥

: Lights red while transmitting.

Back of the front panel

See the illustration of the Front panel on page i-2.