Pioneer AVH-P6000DVD 安装指导
When you connect the separately sold multi-channel processor
(DEQ-P8000) to this unit, do not connect anything to the
speaker leads and system remote control (blue/white).
(DEQ-P8000) to this unit, do not connect anything to the
speaker leads and system remote control (blue/white).
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner’s Manual or dealer.
vehicle Owner’s Manual or dealer.
Connection method
Clamp the lead.
1.
2. Clamp firmly with
needle-nosed
pliers.
pliers.
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to speakers.
to the speaker leads that are not connected to speakers.
Parking brake
switch
switch
Power supply side
Ground side
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
To terminal always supplied
with power regardless of
ignition switch position.
Fuse (10 A)
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Black (ground)
To vehicle (metal) body.
To vehicle (metal) body.
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
Front speaker
Rear speaker
Front speaker
Rear speaker
Fuse resistor
Multi-CD player
(sold separately)
(sold separately)
IP-BUS cable
Left
Right
+
≠
+
≠
+
≠
+
≠
Yellow/black
If you use equipment with Mute function, wire this lead to
the Audio Mute lead on that piece of equipment. If not,
keep the Audio Mute lead free of any connections.
If you use equipment with Mute function, wire this lead to
the Audio Mute lead on that piece of equipment. If not,
keep the Audio Mute lead free of any connections.
This product
Antenna cable
Orange/white
To lighting switch terminal.
To lighting switch terminal.
15 cm
(5-7/8 in.)
(5-7/8 in.)
16 cm (6-1/4 in.)
Fuse resistor
IP-BUS input (Blue)
Violet/white
Refer to Fig. 4.
Refer to Fig. 4.
WARNING
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO
DETECT PARKED STATUS AND MUST BE CONNECTED TO THE
POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER
CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
DETECT PARKED STATUS AND MUST BE CONNECTED TO THE
POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER
CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
AUX input jack
20 cm
(7-7/8 in.)
(7-7/8 in.)
Rear output
(REAR OUTPUT)
(REAR OUTPUT)
This product
When you connect the separately sold
multi-channel processor (e.g. DEQ-P8000)
to this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
multi-channel processor (e.g. DEQ-P8000)
to this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
Note :
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
Note :
When you connect the multi-channel processor
to this unit, a separately sold power amp must
be connected to the multi-channel processor.
When you connect the multi-channel processor
to this unit, a separately sold power amp must
be connected to the multi-channel processor.
Front output
(FRONT OUTPUT)
(FRONT OUTPUT)
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
To system control terminal of the power amp or
Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
≠
+
≠
+
+
≠
+
≠
≠
+
≠
+
Perform these connections when using the
optional amplifier.
optional amplifier.
Blue/white
Connecting cords
with RCA pin plugs
(sold separately)
with RCA pin plugs
(sold separately)
System remote control
Rear speaker
Subwoofer
Subwoofer
Rear speaker
Front speaker
Front speaker
Left
Right
Power amp
(sold separately)
(sold separately)
Power amp
(sold separately)
(sold separately)
Power amp
(sold separately)
(sold separately)
23 cm (9 in.)
15 cm (5-7/8 in.)
15 cm (5-7/8 in.)
Connecting the power cord
Fig. 2
When connecting to separately sold power amp
Fig. 3
Connecting the Units
<ENGLISH>
Connecting the Units
<ENGLISH>