Pioneer VSX-D712 用户指南

Setting up the receiver

06

46

En

One of the following configurations should 
match your setup:

Surround back speaker setting

• Default setting: 

S (VSX-D812),   (VSX-

D712) 

You must let the receiver know if surround 
back speaker(s) have been connected, and 
how big they are. The size you choose (large or 
small) determines how much bass is sent 
from the receiver to the speakers. If you have 
connected a surround back subwoofer (VSX-
D812), you should select the surround back 
subwoofer setting (

SB SW) from the options. 

Choose   (asterisk) if no speaker is 
connected.

 or  to select SB S, SB  , SB SW 

• To select 

SB L, you must have SL selected 

in the Speaker setting. 

Subwoofer setting

You can choose whether the subwoofer is 
used or not. Use the plus (

PLUS) setting for 

extra bass. 

 or  to select subwoofer YES, 

• If you chose the small front speaker 

setting, 

SW YES is automatically set and 

locked. 

• When you select the 

PLUS setting, you 

will get the bass sounds from the 
subwoofer even if the front speakers are 
set to 

L.

Crossover frequency setting

• Default setting: 

Crossover frequency is the point where the 
receiver divides the high and low sounds (the 
frequencies) between the speakers. Since 
most smaller speakers can’t handle deep 
bass tones, you can send these sounds to the 
subwoofer (or if you don’t have a subwoofer, 
the large (

L) speakers in your system) instead 

of the speakers set to small (

S) in your setup. 

Choose the point at which you want the 
frequency routed to the subwoofer (or 

L 

speakers).