Pioneer VSX-D712 用户指南

Setting up the receiver

06

52

En

The test tone for channel delay is output in the 
same order as step 5:

After you have completed all the channels in 
your speaker setup, the volume level returns 
to normal and 

COMPLETE, then RESUME 

shows in the display. 

• Using the MCACC system to set up your 

speaker system will overwrite any 
previous settings you had for the 
STANDARD or ADVANCED SURROUND 
modes.

Setting separate channel 
levels for listening modes 

• Default setting:

In addition to the MCACC setup, you can also 
set relative channel levels from the listening 
position using the method below. Using 

SELECT (see tip below), it is also possible to 
set separate channel levels for each of the 
listening modes.

tone.
The test tone is output in the following order 
(depending on the speaker setting):

• If you don’t hear a test tone from one of 

your speakers, please refer to Speaker 
setting on page 45 and Surround back 
speaker setting on page 46 to make sure 
you have correctly specified your speaker 
setup.