Pioneer VSX-D712 用户指南

 

Making recordings

 08

 

57

 

En

 

Chapter 8:

 

Making recordings

 

Making an audio or a video 
recording

 

You can make an audio or a video recording 
from the built-in tuner, or from an audio or 
video source connected to the receiver (such 
as a CD player or TV). 

Keep in mind you can’t make a digital 
recording from an analog source or vice-
versa, so make sure the components you are 
recording to/from are hooked up in the same 
way (see 

 

on connections). 

If you want to record a video source, you also 
need use the same type of connection for the 
source as for the recorder. For example, you 
can’t record a component hooked up to S-
video jacks with a recorder hooked up to the 
component video outputs (see page 19 for 
more on video connections). 

 

Use the 

 

 buttons (or 

 

).

 

Press 

 

 (front panel) to select 

the input signal corresponding to the source 
component (see page 37 for more on this).

 

Tune to the radio station, load the CD, video, 
DVD etc.

 

Insert a blank tape, MD, video etc. into the 
recording device and set the recording levels.

Refer to the instructions that came with the 
recorder if you are unsure how to do this. 
Most video recorders set the audio recording 
level automatically—check the component’s 
instruction manual if you’re unsure.

 

• The receiver's volume, balance, tone 

(bass, treble, loudness), and surround 
effects have no effect on the recorded 
signal.