Bunn Dual SH 操作指南

Page 31

This function allows the operator to track the

number of brew cycles completed on the left side, the
right side, and the total of both combined. There are
three resettable counters, and one life counter that is
not resettable.

Procedures to view/reset the brew counters:
1. Press and hold the ® pad until the display reads

SET NEW RECIPES. Release the ®.  Press and
release the ® pad until the display reads BREW
COUNTERS.

2. Pressing NO in this screen will advance to the next

function.  Press YES to view the first brew counter
(left). This number represents the brew cycles
initiated since that counter was last reset.

3. To advance to the other counters, press and re-

lease NEXT. The four counters are as follows:
LEFT - total brews on the left side (resettable)
RIGHT -  total brews on the right side (resettable)
LEFT AND RIGHT - total brews on the left and right
sides combined (resettable)
LEFT AND RIGHT - total brews on the left and right
sides combined (non-resettable)

4. To reset any of the counters to zero (except for the

non-resettable counter), press and release RESET
when viewing that particular counter's screen.

P2308

FUNNEL DETECT ?

Procedure to set funnel detect:
1. Press and hold the ® pad until the display reads

SET NEW RECIPES. Release the ®.  Press and
release the ® pad until the display reads FUNNEL
DETECT.

2. NO  or  YES  should be flashing to indicate the

current setting.

4. Select YES to prevent brewing if a Smart Funnel

®

is not correctly situated in the rails.  If this function
is activated and a brew cycle is attempted with the
funnel not properly situated, the display will read,
FUNNEL NOT IN PLACE, until one is in place.

5. Select NO to allow brewing without a Smart Fun-

nel

®

 in place. This is selected when brewing with

a funnel other than a Smart Funnel

®

  (a regular

brew funnel).

6. When finished, press and release DONE. This will

retain the changes, exit this function screen and
advance to the next. Another alternative is to press

either of the 

 pads located on the front switch

panel to exit the FUNNEL DETECT and return to the
MAIN SCREEN.

P2309

5. When finished, press NEXT  to advance counter

screens until the display reads BREW COUNTERS.
Press and release NO  to advance to the next
function screen, or press  and release either of the

  pads on the front switch panel to exit the

BREW COUNTERS function and return to the MAIN
SCREEN.

This function allows the operator to prevent the

start of a brew cycle if a Smart Funnel

®

 is not posi-

tioned correctly in the funnel rails.

29877 121302