Behringer eg1040 用户指南
23
EUROGRAND EG540/1040
V
Accept/ignore MIDI controller information
Use this function to determine how the EG540/1040 responds to
MIDI controller data. MIDI uses a variety of controller informaiton
to control sound changes (e.g. pedal status, volume, effect
intensity).
MIDI controller data. MIDI uses a variety of controller informaiton
to control sound changes (e.g. pedal status, volume, effect
intensity).
Function:
E7.5
Value:
On,
Off
Description:
On
:
Controller data are sent and received (default setting)
Off
:
Controller data are neither sent nor received
The EG540/1040 only responds to the commands
listed in the MIDI implementation chart if controller
data are enabled (see chapter 10.5).
listed in the MIDI implementation chart if controller
data are enabled (see chapter 10.5).
V
MIDI transposition
This function determines whether outgoing MIDI data are
transposed independently of the built-in sound generator. This
can be useful to play the sounds of an external sound module
whose sound generator is controlled from the keyboard of the
EG540/1040 in a different pitch than the internal sounds of the
EG540/1040.
transposed independently of the built-in sound generator. This
can be useful to play the sounds of an external sound module
whose sound generator is controlled from the keyboard of the
EG540/1040 in a different pitch than the internal sounds of the
EG540/1040.
Function:
E7.6
Value:
-12
x12
Description:
0
:
No transposition of the pitch at the MIDI output (default
setting)
setting)
1
x12
: Pitch is transposed up by the number of half-tones
selected
-1
x-12
:
Pitch is transposed down by the number of half-tones
selected
selected
This setting has no effect on the sound generator
of the EG540/1040!
of the EG540/1040!
V
Send control panel settings (snapshot)
Use this function to transmit the current settings of the EG540/
1040 (e.g. sounds and effects, channel volume) via the MIDI
output. This type of transmission only includes system-exclusive
data packages (MIDI dump).
1040 (e.g. sounds and effects, channel volume) via the MIDI
output. This type of transmission only includes system-exclusive
data packages (MIDI dump).
Function:
E7.7
Value:
-
Description:
1) Connect the EG540/1040 to a computer or hardware
sequencer as described in chapter 7.3.2.
2) Set the MIDI sequencer to reception-ready mode.
3) Select the function
E7.7
in EDIT mode.
4) Press the +/YES button to execute the transmission.
When the transmission is complete, the display shows
End
.
You can send the data back to the EG540/1040 at a
later date. To do this, use the MIDI IN jack to connect
the EG540/1040 to the device that received the data
before. As soon as you start the transmission from
the MIDI sequencer, the EG540/1040 will
automatically receive the data. Make sure that
neither DEMO, EDIT or music sequencer mode is
active!
later date. To do this, use the MIDI IN jack to connect
the EG540/1040 to the device that received the data
before. As soon as you start the transmission from
the MIDI sequencer, the EG540/1040 will
automatically receive the data. Make sure that
neither DEMO, EDIT or music sequencer mode is
active!
V
Sending music sequencer data
Use this function to send music sequencer data via the MIDI
output of the EG540/1040. This allows you to archive recorded
music pieces on your music computer or hardware MIDI
sequencer. This type of transmission is only for system-exclusive
data packages (MIDI dump), but not for MIDI playing data.
output of the EG540/1040. This allows you to archive recorded
music pieces on your music computer or hardware MIDI
sequencer. This type of transmission is only for system-exclusive
data packages (MIDI dump), but not for MIDI playing data.
Function:
E7.8
Value:
-
Description:
1) Connect the EG540/1040 to a computer or hardware
sequencer as described in chapter 7.3.2.
2) Set the MIDI sequencer to reception-ready mode.
3) Select the function
E7.8
in EDIT mode.
4) Press the +/YES button to execute the transmission.
When the transmission is complete, the display shows
End
.
You can send the data back to the EG540/1040 at a
later date. To do this, use the MIDI IN jack to connect
the EG540/1040 to the device that received the data
before. As soon as you start the transmission from
the MIDI sequencer, the EG540/1040 will
automatically receive the data. Make sure that
neither DEMO, EDIT or music sequencer mode is
active!
later date. To do this, use the MIDI IN jack to connect
the EG540/1040 to the device that received the data
before. As soon as you start the transmission from
the MIDI sequencer, the EG540/1040 will
automatically receive the data. Make sure that
neither DEMO, EDIT or music sequencer mode is
active!
7. CONNECTION TO EXTERNAL EQUIPMENT