ConnectGear gs-1124 用户指南
User Manual
Publication date: January, 2005
Revision A1
63
4-2-6. Aggregation Configuration
The Aggregation (Port Trunking) Configuration is used to configure the
settings of Link Aggregation. You can bundle more than one port with the same
speed, full duplex and the same MAC to be a single logical port, thus the logical port
aggregates the bandwidth of these ports. This means you can apply your current
Ethernet equipments to build the bandwidth aggregation. For example, if there are
three Fast Ethernet ports aggregated in a logical port, then this logical port has
bandwidth three times as high as a single Fast Ethernet port has.
speed, full duplex and the same MAC to be a single logical port, thus the logical port
aggregates the bandwidth of these ports. This means you can apply your current
Ethernet equipments to build the bandwidth aggregation. For example, if there are
three Fast Ethernet ports aggregated in a logical port, then this logical port has
bandwidth three times as high as a single Fast Ethernet port has.
Function name:
Aggregation Configuration
Function description:
Display the current setup of Aggregation Trunking. With this function, user is
allowed to add a new trunking group or modify the members of an existed
trunking group.
allowed to add a new trunking group or modify the members of an existed
trunking group.
Parameter description:
Normal:
Set up the ports that do not join any aggregation trunking group.
Group 1~8:
Group the ports you choose together. Up to 12 ports can be selected for
each group.
each group.
Fig. 4-11