TI -5019 说明手册

1

5019ENG.DOC   TI-5019 Guidebook, English   Robin Hunt-Smith
Revised: 06/23/00 10:00 AM   Printed: 06/23/00 10:00 AM   Page 1
of 6

1. Press 

N

.

2. Connect the adapter cord to the socket on the back of the calculator.

3. Plug the adapter into an electrical outlet.

 Using any AC adapter other than the appropriate TI adapter may

damage the calculator and void the warranty.

1. Press 

N

. Unplug any connected AC adapter.

2. Remove the battery compartment cover from the bottom of the calculator.

3. If necessary, remove the old batteries. Insert new batteries in the

compartment as shown in the diagram inside the battery compartment.

4. Replace the battery compartment cover.

1. Lift the paper holder so that it extends behind the printer compartment.

2. If using the AC adapter, make sure it is plugged into an electrical outlet.

3. Press 

M

4.  Insert the end of the paper into the paper slot on the back of the

calculator as shown. To avoid paper jams, use quality bond paper.

7. While feeding the paper into the slot, press and hold 

!

.

8. Place the paper roll on the paper holder.

 To prevent damaging the printer (which may void the warranty), when

operating the calculator without paper, turn the printer off. To turn it off, press

"

 so that 

 is not displayed.