Avaya P550 参考指南
Policy
Cajun P550/P220 Command Line Interface Reference Guide
11-3
. *
Define a standard IP access list. The no form of this command removes a standard access
list. The default is to deny.
list. The default is to deny.
Table 11-2.
Parameters, Keywords, Arguments
To Enable:
ip access-list <access-list-name> <access-list-index>
{permit|deny|fwd[1-8]} {<source-ip-addr>
[<source-wildcard>] |any|host <source-ip-addr>}
To Disable:
[no] ip access-list <access-list-name>
[<access-list-index>]
Name
Definition
access-list name
The access list name.
Decimal numbers from 1 to 99 inclusive indicate an
access list type of standard.
access list type of standard.
access-list index
The index of a specific access list rule entry.
permit|deny|
fwd1-8
• permit - Allows access when conditions match.
• deny - Does not permit access when conditions
match.
• fwd1-8 - Forwards traffic with the specified
priority level [1-8].
source-ip-addr
Network number or host from which the packet is
sent. The two ways to specify source are:
sent. The two ways to specify source are:
1. Use a 32-bit quantity in four-part,
dotted-decimal format.
2. Use host source as an abbreviation for source
and a source-wildcard of source 0.0.0.0.