Avaya P550 参考指南
STAP
15-16
Cajun P550/P220 Command Line Interface Reference Guide
.
.
Sets the bridge priority for a particular bridge. The default priority is
0 x 8000 (in hexidecimal).
Command Syntax
Table 15-11.
Parameters, Keywords, Arguments
This example sets the spanning tree priority for the 802.1D Legacy Bridge.
Cajun(configure)# set spantree priority 0xAAAA vlan 1
Bridge Priority Successfully set to 0xAAAA
To Enable:
set spantree priority <priority-value> {802.1D|vlan
{<vlan-id>|name <vlan-name }}
Name
Definition
priority-value
The bridge priority, specified as a two byte value in
hexidecimal (0x8000).
hexidecimal (0x8000).
802.1D
Configure the IEEE 802.1D Legacy Bridge.
Note:
The 802.1D bridge can only be
modified when in the IEEE config
mode.
mode.
vlan-id
Configure a per-vlan or dual-layer bridge by using
the VLAN’s vlan ID.
the VLAN’s vlan ID.
Note:
LAN bridges can only be modified
when in per-vlan or dual-layer mode.
vlan-name
Configure a per-vlan or dual-layer bridge by using
the VLAN’s name.
the VLAN’s name.
Note:
VLAN bridges can only be modified
when in per-vlan or dual-layer mode.