Avaya 10bs 用户指南
Features
Feature Button
To activate features using features codes, you need to press
a programmed Feature button. This sends a signal to the
system that you are about to dial a feature code.
a programmed Feature button. This sends a signal to the
system that you are about to dial a feature code.
Many features have a one-, two-, or three- digit code. If you
have no more avaiIable line buttons for programming a
feature, you can access additional features by dialing their
have no more avaiIable line buttons for programming a
feature, you can access additional features by dialing their
feature codes. For more information on feature codes, see
Appendix B.
Appendix B.
NOTE:
Using a Feature button or a button with a specific feature
programmed on it are the recommended access
methods. You can use # instead of a Feature button only
programmed on it are the recommended access
methods. You can use # instead of a Feature button only
in the following circumstances:
When you have lifted the handset (or used
Speakerphone or Speaker or a headset) on an
Speakerphone or Speaker or a headset) on an
ICOM or SA button and hear a dial tone. You
must not be on an outside line — that is, you must
be listening to the system’s dial tone, not the
must not be on an outside line — that is, you must
be listening to the system’s dial tone, not the
telephone company's dial tone.
When you are connected to another party on an
inside or outside call.
inside or outside call.
Feature Button
5-37
■
■