Avaya 10bs 用户指南
Your Analog Multiline Telephone
Line Buttons
There are 10 or more line buttons on your BIS phone, located
in the center on the BIS-10, and above and along the right
side of the dialpad on the BIS-22, BIS-22D, BIS-34, and BIS
-34D. On the cordless phone, there are 5 line buttons at the
side of the dialpad on the BIS-22, BIS-22D, BIS-34, and BIS
-34D. On the cordless phone, there are 5 line buttons at the
top of the phone just above the dedicated feature buttons.
Use these buttons to make inside calls (calls to and from
other extensions) and outside calls.
Two or more line buttons are labeled either ICOM (Intercom)
or SA (System Access). You have either ICOM or SA
or SA (System Access). You have either ICOM or SA
buttons, but never both.
If you have ICOM buttons, use them to place inside calls only.
Use buttons labeled with phone numbers to place outside
Use buttons labeled with phone numbers to place outside
calls.
If you have SA buttons, use them for both inside and outside
calls. You must enter a dial-out code (usually a 9) to make an
outside call on a SA button.
You can program a feature onto any unlabeled line button.
See Chapter 3, “Using and Programming Features,” for more
on programming unlabeled line buttons.
on programming unlabeled line buttons.
Depending on your company, you may not have all the
buttons described next. If your phone has SA buttons, see
buttons described next. If your phone has SA buttons, see
the following section. If your phone has ICOM buttons, turn to
the section “Phones with ICOM Buttons.”
the section “Phones with ICOM Buttons.”
1-22
Line Buttons