Avaya 10bs 服务手册

23

If you use a feature often, you can program it onto an unused line button for easy access. If you use a
feature occasionally, see Using Features, p. 14.

• Some features 

must be programmed on a button or they can’t be used. (These features are marked

with a ♦ on the Programming Codes list on the next page.)

• Other features (marked with a • on the Programming Codes list) are settings that affect the

way your phone works. Some settings, such as Personalized Ring, affect all the lines on your
phone. During programming, you still have to select a line button, but it can be 

any line button the

feature affects. Others, such as Delay Ring for a single line, are settings that affect a specific line
and require you to press it during programming (these features are noted on the Programming
Codes list). Settings remain active until you program them again.

Copyright © 1998, Lucent Technologies. MERLIN LEGEND is a registered trademark of Lucent Technologies. Mirage,
StarSet, and Supra are registered trademarks of Plantronics, Inc.

To program a feature on an unused line button:
1. Label a button for the feature.
2. Slide the T/P switch to P.
3. Press the button you labeled.
4. Dial the programming code (see Programming Codes).
5. Repeat Steps 3 and 4 to program other buttons. (Label the buttons first.)
6. Slide the T/P switch to center.

To program a setting:
1. Slide the T/P switch to P.
2. Press any ICOM or SA button,

OR
If the setting affects a specific line, press that line button.

3. Dial the programming code (see Programming Codes).
4. Repeat Steps 2 and 3 to program other settings.
5. Slide the T/P switch to center.