Avaya 18d 用户指南
Touch-Tone Enable (F08)
Description
This feature lets a system phone user send touch-tone signals on an outside call
over a rotary line. For example, a user may need to dial touch-tone digits while
on a call to a bank-by-phone service.
over a rotary line. For example, a user may need to dial touch-tone digits while
on a call to a bank-by-phone service.
Related Procedures
■
You must use Dial Mode (#201) to identify rotary lines to the system.
■
To activate this feature from within a number stored on an Auto Dial button
or as part of a Speed Dial number, press
or as part of a Speed Dial number, press
Transfer
when storing the
Considerations
■
■
■
■
This feature is needed only when dialing on a rotary line.
Use Touch-Tone Enable only after a call is connected. For example, use
this feature after dialing a bank-by-phone service that requires you to dial
touch-tone digits.
this feature after dialing a bank-by-phone service that requires you to dial
touch-tone digits.
You can program a Touch-Tone Enable button on a system phone to turn on
Touch-Tone Enable with one touch.
Touch-Tone Enable with one touch.
This feature is available only on system phones.
Programming
To program a Touch-Tone Enable button:
1.
Press
Feature
0
0
System Program
System Program
Central Tel Program
.
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press
Feature
0
8
.
5.
Program another button for this extension or exit programming mode.
Using
From a system phone, press the programmed button or press
Feature
0
8
when you need to enter touch-tone digits. Touch-Tone Enable stays in effect
until you hang up.
until you hang up.
Touch-Tone Enable (F08)
5-123