Epson EPL-N2000 用户手册
Printing With the Windows Printer Drivers 2-5
To check or change individual settings, click the tab at the top of
the screen. Click the buttons on the bottom of the screen to do
the following:
the screen. Click the buttons on the bottom of the screen to do
the following:
The next section describes the basic printer driver settings you
should check or change each time you print. The table beginning
on page 2-7 lists all the settings and their defaults.
should check or change each time you print. The table beginning
on page 2-7 lists all the settings and their defaults.
Checking the Basic Settings
The printer driver’s default settings are suitable for most types
of documents. However, you should check the settings listed
below each time you print to make sure they are correct. All
these settings are on the Printer Settings tab.
of documents. However, you should check the settings listed
below each time you print to make sure they are correct. All
these settings are on the Printer Settings tab.
OK
After you’re finished, click OK to save your
settings and exit the driver. (You can also save a
group of settings for later use; see page 2-13.)
settings and exit the driver. (You can also save a
group of settings for later use; see page 2-13.)
Cancel
To delete any changes you made, click Cancel
.
Help
If you need help with the driver, click the Help
button.
Fonts
Accesses the Font Manager program described
in the Technical Information
in the Technical Information
manual.
Overlays
Accesses the Overlay Manager and Softtray
Manager programs described in the Technical
Information
Manager programs described in the Technical
Information
manual.