Epson EPL-N2000 用户手册
Using the Control Panel 3-21
PS Menu
The PS menu, which is available only when the EPSONScript
Level 2 module is installed, controls two features available in the
PostScript emulation mode. You can also set these features using
the Windows 95 printer driver software; see Chapter 2 for
details.
Level 2 module is installed, controls two features available in the
PostScript emulation mode. You can also set these features using
the Windows 95 printer driver software; see Chapter 2 for
details.
Pen 0, Pen 1,
Pen 2, Pen 3,
Pen 4, Pen 5,
Pen 6
Pen 2, Pen 3,
Pen 4, Pen 5,
Pen 6
Selects the line width for the designated pen; you can
select values between 0.05 mm and 5.00 mm, in
increments of 0.05 mm. The default setting for all pens
is 0.35 mm.
select values between 0.05 mm and 5.00 mm, in
increments of 0.05 mm. The default setting for all pens
is 0.35 mm.
PS menu items
Menu item
Description
Err Sheet
Indicates whether the printer prints an EPSONScript error
message. If the option is off, the message is displayed on
the control panel but not printed.
message. If the option is off, the message is displayed on
the control panel but not printed.
Protect Level
Allows you to increase the amount of memory allocated
for page protection. If the option is off, an overrun error
occurs when the printer doesn’t have enough memory to
print a page. If an error occurs, raise the level from 1 up to
5. Raising the protect level decreases printing speed.
for page protection. If the option is off, an overrun error
occurs when the printer doesn’t have enough memory to
print a page. If an error occurs, raise the level from 1 up to
5. Raising the protect level decreases printing speed.
GL2 menu items (continued)
Menu item
Description