Epson EPL-N2000 用户手册
4-16
Installing Options
5. Connect the interface cable(s).
6. Make sure the printer’s power switch is in the off position;
then plug the power cable into the printer and into an
electrical outlet.
electrical outlet.
7. Turn on the printer.
8. Now run the Windows printer driver to add the optional
paper cassette to your available paper source list. See
Chapter 2 for instructions.
Chapter 2 for instructions.
To verify that the paper cassette is installed correctly, print a
status sheet and make sure the cassette is listed under
“Hardware Configurations.” To do this, wait until the printer
warms up (Ready
status sheet and make sure the cassette is listed under
“Hardware Configurations.” To do this, wait until the printer
warms up (Ready
appears on the control panel display and the
On Line
light is on); then press the Enter
button twice.
Select the paper source in your application program. See your
software documentation for more information.
software documentation for more information.
Note:
If you use the Remote Control Panel utility or SelecType to control your
printer, you need to select the optional paper cassette only when you are
ready to print. See Chapter 3 or the Technical Information manual for
instructions.
printer, you need to select the optional paper cassette only when you are
ready to print. See Chapter 3 or the Technical Information manual for
instructions.
Installing the Duplex Unit
The optional Duplex Unit enables you to print on both sides of
the paper. It is compatible with the following paper sizes: A3, B4,
F4, A4, B5, International B5, A5, Ledger, Legal, GLG, Letter,
GLT, Executive, HLT.
the paper. It is compatible with the following paper sizes: A3, B4,
F4, A4, B5, International B5, A5, Ledger, Legal, GLG, Letter,
GLT, Executive, HLT.
Follow these steps to install the Duplex Unit:
1. Turn off the printer and unplug the power cable from both
the printer and the electrical outlet.