Epson EPL-N2000 用户手册
Installing Options 4-21
8. Plug the power cord into the printer and an outlet. Then turn
on the printer.
Installing the EPSONScript Module or Memory
Modules
Modules
To speed up printing of complex, graphics-intensive documents
and downloaded fonts, you can install an EPSONScript Level 2
module, EPSON’s proprietary PostScript module, or you can
add memory to your printer.
and downloaded fonts, you can install an EPSONScript Level 2
module, EPSON’s proprietary PostScript module, or you can
add memory to your printer.
Install the EPSONScript Level 2 module in the ROM slot on your
printer’s controller board. The controller board also includes two
RAM slots to install optional memory modules. (You can add as
much as 64MB to your printer’s memory, bringing total memory
to 68MB.)
printer’s controller board. The controller board also includes two
RAM slots to install optional memory modules. (You can add as
much as 64MB to your printer’s memory, bringing total memory
to 68MB.)
Memory modules must meet these requirements:
❏
72-pins
❏
1MB, 2MB, 4MB, 8MB, 16MB, or 32MB capacity
❏
Maximum 70 ns access speed
❏
Maximum dimensions: 4.25 inches (108 mm) long, 1.53
inches (39 mm) wide, and 0.4 inch (10 mm) thick.
inches (39 mm) wide, and 0.4 inch (10 mm) thick.
Follow these steps:
1. Turn off the printer. Unplug the power cable from the
printer and the electrical outlet.
w
Warning:
To avoid electrical shock, do not access the printer’s controller board
unless the printer is turned off and unplugged from the electrical
outlet.
unless the printer is turned off and unplugged from the electrical
outlet.