Epson EPL-N2000 网络指南
2-14
Configuring the EPL-N2000 for NetWare
6. Select a port number in the Configured Printers list and
press Enter.
7. Select the name of the EPL-N2000 on the Printer
Configuration menu. Then highlight the Printer Type and
select LPT1.
select LPT1.
Note:
Although you can define the printer port as COM 2, it is
recommended that you define it as LPT1 to maintain compatibility.
Although you can define the printer port as COM 2, it is
recommended that you define it as LPT1 to maintain compatibility.
8. Press Esc; then press
Enter
to save changes.
9. Select Queues Serviced by Printer from the Print Server
Configuration menu and assign a queue to the print server
port from the Available Queues list.
port from the Available Queues list.
10. Press Esc
to exit.
Configuring the Operating Mode and Making Other
Changes
Changes
After you define the EPL-N2000 on a NetWare print server, you
are ready to use EPSON Net! for NetWare to configure it to
operate as a remote printer. You can then make the following
changes:
are ready to use EPSON Net! for NetWare to configure it to
operate as a remote printer. You can then make the following
changes:
❏
Change the port number to allow the EPL-N2000 to connect
to a different port on the NetWare print server.
to a different port on the NetWare print server.
❏
Enable or disable hunting, which allows the EPL-N2000 to
connect to the first available active port on the print server.
(This feature is useful if the NetWare print server has many
ports.)
connect to the first available active port on the print server.
(This feature is useful if the NetWare print server has many
ports.)