Epson EPL-N2000 网络指南
5-6
Configuring the EPL-N2000 for UNIX
Note:
You can also use any name as the local printer name (for example,
the default printer name lp can be used.)
You can also use any name as the local printer name (for example,
the default printer name lp can be used.)
The following example illustrates an entry with the lpb
printer option:
printer option:
printer1:\
:lp = : rm = Allison : rp = lpb : sd = /var/spool/printer1:
3. If you are setting up the EPL-N2000 to support different lpr
filters, repeat steps 1 and 2 for each remote printer option
that you want to add. Make sure to enter a new remote
printer name and local printer name for every option.
that you want to add. Make sure to enter a new remote
printer name and local printer name for every option.
Printing to the EPL-N2000
After setting up the printer, you can use either lpr or ftp from
any host to direct a print file to the EPL-N2000.
any host to direct a print file to the EPL-N2000.
Note:
Because lpr may strip control characters, users may prefer to print using
ftp.
Because lpr may strip control characters, users may prefer to print using
ftp.
The EPL-N2000 can handle many separate communications
channels simultaneously. However, unless it is coupled with a
compatible spooling unit, the EPL-N2000 does not have any
disk-spooling capability. Print jobs received while the printer is
processing a job are stacked and printed in rotation.
channels simultaneously. However, unless it is coupled with a
compatible spooling unit, the EPL-N2000 does not have any
disk-spooling capability. Print jobs received while the printer is
processing a job are stacked and printed in rotation.
The EPL-N2000 responds to a print query by sending back
status of the current print job and any stacked jobs. If it receives
the query when all available connections are in use, it does not
respond.
status of the current print job and any stacked jobs. If it receives
the query when all available connections are in use, it does not
respond.