Epson EPL-N2000 网络指南
Configuring the EPL-N2000 for UNIX 5-13
The following example illustrates the /etc/qconfig file:
epson:
device=epsonprn
up=true
host=200.200.200.99
rq=C82331_PRT
up=true
host=200.200.200.99
rq=C82331_PRT
epsonprn:
backend=/usr/lp/rembak
6. If you want the EPL-N2000 to support lpr filters, include a
line with the following format in the /etc/qconfig file:
Remote Device=<printer option>
For example, to support the lpaf filter, enter the following:
Remote Device=lpaf
Note:
See “Setting Up the EPL-N2000 as a Remote Printer” earlier in this
chapter for a list of printer options.
See “Setting Up the EPL-N2000 as a Remote Printer” earlier in this
chapter for a list of printer options.
Setting Up for HP-UX Systems
You can use either ftp or rlp (lpr) to print from an HP-UX
system. You use SAM to set up both. Before starting SAM,
enter a unique IP address and host name in the /etc/hosts file.
(See “Setting Up the EPL-N2000 as a Network Device” earlier
in this chapter for information on assigning an IP address and
host name.)
system. You use SAM to set up both. Before starting SAM,
enter a unique IP address and host name in the /etc/hosts file.
(See “Setting Up the EPL-N2000 as a Network Device” earlier
in this chapter for information on assigning an IP address and
host name.)