Epson EPL-N2000 网络指南
6-6
Configuring the EPL-N2000 for OS/2
Copying the Piping Software
Follow these steps to create a remote print service directory and
copy the EPL-N2000 piping software:
copy the EPL-N2000 piping software:
1. If you’re unsure of the printer’s serial number, print a
network adapter status sheet. See Chapter 1 for details.
2. Insert the diskette labeled EPSON Net! for NetWare DOS
and OS/2 in your workstation’s diskette drive.
3. Open an OS/2 full screen command session.
4. To create a remote print service directory, type the following
at the OS/2 command line:
MD C:\EPNET
5. Open the OS/2 directory on drive A (or B) and go to the
PIPES directory for your network protocol.
❏
If your protocol is TCP/IP, type CD TCPIP\PIPE and
press the Enter key.
press the Enter key.
❏
If your protocol is NetBEUI, type CD NETBEUI\PIPE and
press the Enter key.
press the Enter key.
6. Copy all files in the PIPES directory to the remote print
service directory:
❏
If your protocol is TCP/IP, type the following:
COPY A:\TCPIP\PIPE\*.* C:\EPNET
❏
If your protocol is NetBEUI, type the following:
COPY A:\NETBEUI\PIPE\*.* C:\EPNET