Epson EPL-N2000 网络指南

Introduction 3

Note:
You do not need special network utility software to connect the
EPL-N2000 to a Windows NT server running DLC.

❏

EPSON Net! for OS/2 is a character-based utility for
configuring the EPL-N2000 as a remote printer on an OS/2
LANServer

or LANManager

workstation.

❏

The EPSON Status Monitor shows printer status and allows
the administrator to change certain print settings, such as
print density. It runs on Windows 95 or Windows NT 3.5x.

How This Manual Is Organized

This manual describes how to connect the EPL-N2000 to the
network and configure it in each of the supported network
environments.

Chapter 1

, “Getting Started,” explains how to connect the

printer to the network. It also explains how to read the indicator
lights on the Ethernet interface card and use the card to print a
status sheet.

Chapter 2

, “Configuring the EPL-N2000 for NetWare,” describes

how to use EPSON Net! for NetWare DOS or EPSON Net! for
NetWare Windows to configure the EPL-N2000 for use as a print
server or remote printer running under Novell NetWare.

Chapter 3

, “Configuring the EPL-N2000 for AppleTalk,”

describes how to use EPSON Net! for Macintosh to configure the
EPL-N2000 for use on an AppleTalk network.

Chapter 4

, “Configuring the EPL-N2000 for Windows NT,”

describes how to use EPSON Net! for Windows NT to configure
the EPL-N2000 for use on a Windows NT server running
TCP/IP. It also explains how to connect the printer directly to a
Windows NT server running DLC transport protocol.