Epson LQ-2080 用户手册
6
Using EPSON Status Monitor 2
6-3
R4C3730
Rev. B
Rev. B
A5 size
CHAP6.FM
5/10/99
Pass 0
R
Proof Sign-off:
<Crestec>
<Crestec>
_______
<Kimura>
_______
<Crestec>
_______
Installing EPSON Status Monitor 2
Note:
If you installed EPSON Status Monitor 2 when you installed the printer
software, you do not need to install it again.
If you installed EPSON Status Monitor 2 when you installed the printer
software, you do not need to install it again.
To install the Status Monitor, follow these steps:
1. Make sure Windows is running. Insert the printer software
CD in the CD-ROM drive. (If you an using printer software
floppy disks insert disk 1 in a disk drive. Then double-click
the drive icon.
floppy disks insert disk 1 in a disk drive. Then double-click
the drive icon.
2. If a dialog box appears, click Quit.
3. Click Start, and select Run.
4. Type D:\STM2\SETUP.
5. Click OK and then follow the instructions on the screen.
Note:
If the dialog box below appears, and if your printer is connected directly
to your computer, select Monitor local printers. If it is connected
through a network, select Monitor Windows shared printers. Then
click Next.
If the dialog box below appears, and if your printer is connected directly
to your computer, select Monitor local printers. If it is connected
through a network, select Monitor Windows shared printers. Then
click Next.
After you install EPSON Status Monitor 2 and restart your
computer, the Status Monitor starts automatically and adds a
printer-shaped background monitoring icon to the taskbar at the
bottom of your computer screen. This icon appears only when the
Status Monitor is active.
computer, the Status Monitor starts automatically and adds a
printer-shaped background monitoring icon to the taskbar at the
bottom of your computer screen. This icon appears only when the
Status Monitor is active.