Epson LQ-2080 用户手册
1-6
Setting Up the Printer
R4C3730
Rev. B
Rev. B
A5 size
CHAP1.FM
5/10/99
Pass 0
L
Proof Sign-off:
<Crestec>
<Crestec>
_______
<Kimura>
_______
<Crestec>
_______
Installing or Replacing the Ribbon Cartridge
This section describes how to install or replace the ribbon
cartridge. The installation and replacement procedures are the
same except that you need to remove the used ribbon cartridge
before you replace it with a new one.
cartridge. The installation and replacement procedures are the
same except that you need to remove the used ribbon cartridge
before you replace it with a new one.
EPSON recommends using genuine EPSON ribbon cartridges
(S015086). Products not manufactured by EPSON may cause
damage to your printer not covered by EPSON’s warranties.
(S015086). Products not manufactured by EPSON may cause
damage to your printer not covered by EPSON’s warranties.
w
Warning:
You will need to move the print head by hand to install or replace
the ribbon cartridge. If you have just used the printer, the print
head may be hot; let it cool for a few minutes before touching it.
You will need to move the print head by hand to install or replace
the ribbon cartridge. If you have just used the printer, the print
head may be hot; let it cool for a few minutes before touching it.
1. Make sure the printer is turned off. The printer is off when
the surface of the Operate button is even with the button
protectors as shown.
protectors as shown.
c
Caution:
Moving the print head while the printer is on may damage
the printer.
Moving the print head while the printer is on may damage
the printer.
2. If the printer is connected to an electrical outlet, unplug it
from the outlet.
G1-10a.eps