Epson LQ-2080 用户手册
2-10
Printing on Continuous Paper
R4C3730
Rev. B
Rev. B
A5 size
CHAP2.FM
5/10/99
Pass 0
L
Proof Sign-off:
<Crestec>
<Crestec>
_______
<Kimura>
_______
<Crestec>
_______
To remove the remaining paper from the printer, press the Load/
Eject button to feed the paper backward to the standby position.
(See the Glossary for an explanation of the standby position.) Then
open the sprocket covers of the tractor and remove the paper.
Eject button to feed the paper backward to the standby position.
(See the Glossary for an explanation of the standby position.) Then
open the sprocket covers of the tractor and remove the paper.
c
Caution:
Always tear off your printed document before you press the
Load/Eject
Always tear off your printed document before you press the
Load/Eject
button. Reverse feeding several pages at a time may
cause a paper jam.
Using the Front Push Tractor (optional)
To use the front push tractor, you need to purchase the optional
tractor unit and install it in the front push position. slot. For
information on when to use the front push tractor, see “Available
Paper Paths” on page -3.
tractor unit and install it in the front push position. slot. For
information on when to use the front push tractor, see “Available
Paper Paths” on page -3.
Note:
The tractor is installed in the rear push position only when the printer
is shipped. For the front push tractor, purchase the optional tractor unit
(C80032✻).
The tractor is installed in the rear push position only when the printer
is shipped. For the front push tractor, purchase the optional tractor unit
(C80032✻).
Installing the tractor in the front push position
If a tractor is installed in the front push position, skip to “Loading
paper onto the front push tractor“ on the next page.
paper onto the front push tractor“ on the next page.
If a tractor is installed in the pull position, you need to remove it
and install the paper tension unit as described on page 2-31 before
using the front push tractor.
and install the paper tension unit as described on page 2-31 before
using the front push tractor.
To install the tractor in the front push position, follow these steps:
1. Make sure the printer is turned off.
2-20a.eps
2-21.eps