Epson LQ-2080 用户手册
2
Printing on Continuous Paper
2-19
R4C3730
Rev. B
Rev. B
A5 size
CHAP2.FM
5/10/99
Pass 0
R
Proof Sign-off:
<Crestec>
<Crestec>
_______
<Kimura>
_______
<Crestec>
_______
Because thick paper requires a straight paper path to avoid paper
jams, it is best to load paper in the front or bottom slot when using
the pull tractor. You can also load paper onto the pull tractor from
the rear slot. However, doing so is not recommended because the
paper path from the rear slot is curved.
jams, it is best to load paper in the front or bottom slot when using
the pull tractor. You can also load paper onto the pull tractor from
the rear slot. However, doing so is not recommended because the
paper path from the rear slot is curved.
c
Caution:
Do not load continuous paper with labels in the rear paper slot;
the labels may come off their backing sheet inside the printer and
cause a paper jam.
Do not load continuous paper with labels in the rear paper slot;
the labels may come off their backing sheet inside the printer and
cause a paper jam.
To further reduce the chance of paper jams and improve the
performance of continuous paper, you can use two tractors in
combination. When using this printing method, you load your
paper onto both the front push tractor and the pull tractor, or both
the rear push tractor and the pull tractor. See “Using two tractors
in a push and pull combination” on page 2-27.
performance of continuous paper, you can use two tractors in
combination. When using this printing method, you load your
paper onto both the front push tractor and the pull tractor, or both
the rear push tractor and the pull tractor. See “Using two tractors
in a push and pull combination” on page 2-27.
Installing the tractor in the pull position
To install a tractor in the pull position, you must install the
optional pull tractor (C80032✽).
optional pull tractor (C80032✽).
Note:
The tractor in the rear push position cannot be removed.
The tractor in the rear push position cannot be removed.
To install a tractor in the pull position, follow these steps:
1. Make sure the printer is turned off. Lift the printer cover up
and off the printer.
2-29a.eps
2-35c.eps