Epson LQ-2080 规格指南
EPSON LQ-2080
2/99
EPSON LQ-2080
- 25
9. To remove any slack in the ribbon, turn the ribbon-
tightening knob in the direction of the arrow shown in
step 8. Then slide the print head from side to side to make
sure it moves smoothly.
step 8. Then slide the print head from side to side to make
sure it moves smoothly.
10. Replace the printer cover.
Clearing Paper Jams
To clear a paper jam, follow these steps:
1. Press the
Operate
button to turn off the printer.
2. If a single-sheet of paper is stuck on the paper guide, gently
remove it.
3. Remove the printer cover. If you are loading continuous
paper from the rear slot, remove the paper guide.
4. If continuous paper is jammed in the printer, tear off the
fresh supply at the perforation nearest the paper entry slot.
5. Turn the knob on the right side of the printer away from
you to eject the paper in the printer. Remove any remaining
pieces of paper.
pieces of paper.
Caution:
Use the knob on the right side of the printer only to clear
paper jams when the printer is off. Otherwise, you may
damage the printer or lose the top-of-form or tear-off
position.
Use the knob on the right side of the printer only to clear
paper jams when the printer is off. Otherwise, you may
damage the printer or lose the top-of-form or tear-off
position.
6. Replace the printer cover, and the paper guide if necessary.
Then close the paper guide cover.
7. Press the
Operate
button to turn on the printer. Make sure
the Paper Out and Pause lights are off.
Your Printer’s Default Settings
The printer’s default settings control many printer functions.
While you can often set these functions through your software
or printer driver, you may sometimes need to change a default
setting from the printer’s control panel using the default-
setting mode.
While you can often set these functions through your software
or printer driver, you may sometimes need to change a default
setting from the printer’s control panel using the default-
setting mode.
The following table lists the default settings (highlighted in bold
text) and the options you can select in the default-setting mode.
To change the default settings, see the next section, “Changing
Default Settings.”
text) and the options you can select in the default-setting mode.
To change the default settings, see the next section, “Changing
Default Settings.”
Settings
Options
Page length for front
tractor*
tractor*
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5,
11, 70/6, 12, 14, 17
11, 70/6, 12, 14, 17
Page length for rear
tractor*
tractor*
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5,
11, 70/6, 12, 14, 17
11, 70/6, 12, 14, 17
Skip over perforation
On, Off
Auto tear off
On, Off
Auto line feed
On, Off
Print direction
Auto, Bi-D, Uni-D
I/F mode
Auto, Parallel, Optional
Auto I/F wait time
10 seconds, 30 seconds
Software
ESC/P2, IBM 2391 Plus
Character table
Standard model:
Italic, PC 437, PC 850, PC 860, PC 863,
PC 865, PC 861, BRASCII, Abicomp,
Roman 8, ISO Latin 1, PC 858,
ISO 8859-15
All other models:
Italic, PC 437, PC 850, PC 437 Greek,
PC 853, PC 855, PC 852, PC 857, PC 864,
PC 866, PC 869, MAZOWIA, Code MJK,
ISO 8859-7, ISO Latin 1T, Bulgaria, PC 774,
Estonia, ISO 8859-2, PC 866 LAT,
PC 866 UKR, PC APTEC, PC 708, PC 720,
PC AR864, PC 860, PC 865, PC 861, PC
863, BRASCII, Abicomp, Roman 8, ISO
Latin 1, PC 858, ISO 8859-15
Italic, PC 437, PC 850, PC 860, PC 863,
PC 865, PC 861, BRASCII, Abicomp,
Roman 8, ISO Latin 1, PC 858,
ISO 8859-15
All other models:
Italic, PC 437, PC 850, PC 437 Greek,
PC 853, PC 855, PC 852, PC 857, PC 864,
PC 866, PC 869, MAZOWIA, Code MJK,
ISO 8859-7, ISO Latin 1T, Bulgaria, PC 774,
Estonia, ISO 8859-2, PC 866 LAT,
PC 866 UKR, PC APTEC, PC 708, PC 720,
PC AR864, PC 860, PC 865, PC 861, PC
863, BRASCII, Abicomp, Roman 8, ISO
Latin 1, PC 858, ISO 8859-15
International character set
for Italic table
for Italic table
Italic U.S.A, Italic France, Italic Germany,
Italic U.K., Italic Denmark1, Italic Sweden,
Italic Italy, Italic Spain1
Italic U.K., Italic Denmark1, Italic Sweden,
Italic Italy, Italic Spain1
0 slash
O, Ø
High-speed draft
On, Off
Input buffer
On, Off
Buzzer
On, Off
Auto CR (IBM 2391
Plus)**
Plus)**
On, Off
A.G.M. (IBM 2391 Plus) **
On, Off
Font
OCR-B, Orator, Orator-S, Script C,
Roman T, Sans Serif H
Roman T, Sans Serif H
Roll paper
On, Off
*
The options available vary depending on the country.
**
These settings take effect only when IBM 2391 Plus
emulation is selected.