Epson C82 产品数据表
EPSON Stylus C82
10/02
EPSON Stylus C82
-
5
Installing the Cartridges the First Time
1. Turn on the printer.
2. Lower the printer’s output tray and open the cover.
3. Shake the package of ink cartridges four or five times. Then
remove the cartridges from the package.
4. Wait a moment for the ink cartridge holders to move into
loading position. Then lower each ink cartridge into its
holder. The color of the cartridge label should match the
sticker on the holder.
holder. The color of the cartridge label should match the
sticker on the holder.
Caution: Install all four ink cartridges, and leave them
installed for all types of printing, or the printer won’t work.
installed for all types of printing, or the printer won’t work.
5. Gently push each cartridge down until it is completely
seated.
6. Press the H ink button and close the printer cover.
7. Ink charging takes about 90 seconds. You will see the green
P
power light flash and hear the printer charging your ink.
Don’t turn off the printer during this process or you’ll waste
ink.
ink.
Caution: Never turn off the printer when the
P
power light
is flashing unless the printer hasn’t moved or made any
noise for more than 5 minutes.
noise for more than 5 minutes.
Replacing an Ink Cartridge
When the red H ink out light is flashing, one of your ink
cartridges is low on ink. When the H ink out light stays on, an
ink cartridge is empty and you need to replace it.
cartridges is low on ink. When the H ink out light stays on, an
ink cartridge is empty and you need to replace it.
Caution: You cannot print if any of the ink cartridges are
empty. Leave the empty cartridge installed in the printer
until you have obtained a replacement; otherwise the ink
remaining in the print head nozzles may dry out.
empty. Leave the empty cartridge installed in the printer
until you have obtained a replacement; otherwise the ink
remaining in the print head nozzles may dry out.
Note: If the
)
paper out light is also flashing, check the
table on page 4. You may have a paper jam or another
problem.
problem.
When an installed ink cartridge is more than six months old,
you may also need to replace it if you notice that your
printouts don’t look as good as they used to. If print quality
doesn’t improve after cleaning and aligning the print head,
you can replace the cartridge even if the H ink out light isn’t
flashing. See page 7 for instructions.
you may also need to replace it if you notice that your
printouts don’t look as good as they used to. If print quality
doesn’t improve after cleaning and aligning the print head,
you can replace the cartridge even if the H ink out light isn’t
flashing. See page 7 for instructions.
Use these EPSON ink cartridges within six months of
installing them and before the expiration date on the package:
installing them and before the expiration date on the package:
Caution: To ensure good results, use genuine EPSON ink
cartridges and do not refill them. Other products may cause
damage to your printer not covered by EPSON’s warranty.
cartridges and do not refill them. Other products may cause
damage to your printer not covered by EPSON’s warranty.
Black
T032120
Cyan
T042220
Magenta
T042320
Yellow
T042420
Ink button