Epson C82 用户指南

Problem Solving

■

For Windows 2000 or XP, don’t 
select 

Block

 under 

Control Panel> 

System> Hardware> Driver 
Signing

; select 

Ignore

 or 

Warn

 

instead.

■

If you’re using Windows 98, Me, 
2000, or XP with a USB 
connection, make sure your system 
was not upgraded from Windows 
95; the USB driver may not install 
correctly.

■

Make sure the Universal Serial Bus 
Controller is working properly. See 
your Windows online help system 
for details. 

■

If you’re printing over a network, 
see your on-screen Reference Guide 
for instructions on configuring your 
printer for use on a network.

■

In Windows, make sure your 
printer is selected as the default 
printer in the Printers utility.

The Ppower light is on, but nothing 
prints.

■

Make sure the interface cable 
is connected securely and that 
the cable meets the system 
requirements on page 59 or 
page 60.

■

Run a printer check as described 
on page 42. If the check page 
prints, make sure your printer 
software is installed correctly. 

■

If you’re printing on a network, you 
need to set up your printer for 
network printing, as described in 
your on-screen Reference Guide.

■

The print head nozzles may need 
cleaning; see page 25 for 
instructions.

■

The printer won’t operate properly 
if it’s tilted or at an angle. Place it 
on a flat, stable surface.

Your printer is performing routine 
maintenance.

Make sure your system meets the 
requirements beginning on page 59. If 
you’re printing a high-resolution image, 
you need more than the minimum 
requirements listed. 

You may also need to:

■

Clear space on your hard disk or 
run a defragmentation utility.