Epson 2580 产品数据表

Epson Perfection 2580 Photo

6/04

Epson Perfection 2580 Photo - 5

3. Place a 35 mm slide into the holder with its shiny base side 

facing down. Your image should appear backwards on the 
side that faces up.

Place the top of the image toward the left side of the 
scanner.

4. Close the scanner cover.

5. To scan your slide, press the 4 Scan and Save button or 

open EPSON Smart Panel and select 

Scan and Save

. This 

scans your slide using ideal settings in Full Auto Mode and 
opens it in ArcSoft PhotoImpression for viewing, editing, 
and printing. See your on-screen Reference Guide and Smart 
Panel help for instructions on selecting scan modes and 
complete scanning details.

6. When you’re finished scanning, you can store the slide 

holder in the scanner cover. Slide the holder into the cover, 
then replace the document mat.

The scanner’s ] Start light indicates the scanner status.

Before transporting the scanner for a long distance or storing it 
for an extended period of time, you need to lock the scanner’s 
carriage to prevent damage. 

1. Plug in the scanner, connect it to your computer, and wait 

until the carriage moves to the home position (position 
nearest the buttons). While the 

]

 Start light is green, 

unplug the scanner.

2. If the cover cable is attached, disconnect it.

]

 Flashing green

Warming up or scanning.

 Green

Ready to scan.

 Flashing red

Make sure the transportation lock is unlocked.

Try restarting your computer and unplugging the 
scanner. Wait 10 seconds, then plug the scanner 
back in. 

Film may be jammed in the auto film loader. 
Disconnect the scanner from the computer, wait 
10 seconds, and connect it to the computer again 
to see if the film ejects on its own. If film is still 
jammed, see your on-screen Reference Guide.

If the red light is still flashing, contact your dealer 
or Epson.

 Off

Make sure your scanner is connected to your 
computer and plugged into a power source.