Lexmark x9350 用户手册

Be sure that printer is
detecting a dial tone

See “Sending a fax while listening to a call (On Hook Dial)” on page 129.

Check the Dial Method setting.

Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing,
this means it did not recognize the dial tone.

From the control panel, press 

 or 

 repeatedly until 

Fax is highlighted.

Press  .

Press 

 or 

 repeatedly until the 

Fax Setup submenu is highlighted.

Press  .

Press 

 or 

 repeatedly until the 

Dialing and Sending submenu is

highlighted.

Press  .

Press 

 or 

 repeatedly until you reach 

Dial Method.

Press 

 or 

 repeatedly until 

Behind PBX (Dial Tone Detect Off) appears.

Press 

 to save.

Check original

Ask the sender to verify the original document was loaded correctly.

Check ink

Check the ink levels, and install a new print cartridge if necessary.

Cartridges may have
tape on them

Remove the print cartridges.

Make sure the sticker and tape have been removed.

Reinsert the print cartridges.

Review checklist for
sender

Check that the quality of the original document is satisfactory.

Resend the fax. There may have been a problem with the quality of the telephone line
connection.

Increase the fax scan resolution.

Check ink

Check the ink levels, and install a new print cartridge if necessary.