Cisco 3560x-24p 参考指南

Use the boot auto-download-sw global configuration command on the switch stack to specify a URL 
pathname to use for the automatic software upgrades. Use the no form of this command to remove the 
software image.

This command is supported only on Catalyst 3750-X switches.

Disabled.

Global configuration

The source URLs for the software images. The image-name.tar is the 
software image to download and install on the switch.

These options are supported:

Local flash file system syntax on the standalone switch or the stack 
master:

 

Local flash file system syntax on a stack member:

 

flash member number:

The member number can be from 1 to 9.

FTP syntax: 
ftp:[[//username[:password]@location]/directory]/image-name.tar

HTTP server syntax for an HTTP server:

 

http://[[username:password]@]{hostname | 
host-ip}[/directory]/image-name.tar

Secure HTTP server syntax:

 

https://[[username:password]@]{hostname | 
host-ip}[/directory]/image-name.tar

Remote Copy Protocol (RCP) syntax: 
rcp:[[//username@location]/directory]/image-name.tar

Secure Copy Protocol (SCP) syntax: 
scp:[[//username@location]/directory]/image-name.tar

TFTP syntax:

 

tftp:[[//location]/directory]/image-name.tar