Cisco 3560x-24p 参考指南
B-30
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands
debug monitor
debug monitor
Use the debug monitor privileged EXEC command to enable debugging of the Switched Port Analyzer
(SPAN) feature. Use the no form of this command to disable debugging.
(SPAN) feature. Use the no form of this command to disable debugging.
debug monitor {all | errors | idb-update | info | list | notifications | platform | requests | snmp}
no debug monitor {all | errors | idb-update | info | list | notifications | platform | requests | snmp}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The undebug monitor command is the same as the no debug monitor command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
all
Display all SPAN debug messages.
errors
Display detailed SPAN error debug messages.
idb-update
Display SPAN interface description block (IDB) update-trace debug messages.
info
Display SPAN informational-tracing debug messages.
list
Display SPAN port and VLAN-list tracing debug messages.
notifications
Display SPAN notification debug messages.
platform
Display SPAN platform-tracing debug messages.
requests
Display SPAN request debug messages.
snmp
Display SPAN and Simple Network Management Protocol (SNMP) tracing
debug messages.
debug messages.
Release
Modification
12.2(53)SE2
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
Displays information about all SPAN and remote SPAN (RSPAN) sessions
on the switch.
on the switch.