Cisco 3560x-24p 参考指南
C-19
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform ipv6 mld snooping
show platform ipv6 mld snooping
Use the show platform ipv6 mld snooping privileged EXEC command to display platform-dependent
IPv6 MLD snooping information.
IPv6 MLD snooping information.
show platform ipv6 unicast {all | control [di] | counters | flood [vlan vlan_id | group ip-address
| hardware] | retry [local | remote [count] [| {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
do not appear, but the lines that contain Output appear.
all
Display all MLD snooping platform IP multicast information.
control
Display MLD snooping control information.
di
(Optional) Display MLD snooping control entries.
counters
Display MLD snooping counters.
flood
Display MLD snooping flood information.
vlan vlan_id
(Optional) Display MLD snooping flood information for the specified
VLAN. The range is 1 to 4094.
VLAN. The range is 1 to 4094.
group ip-address
Display MLD snooping IP multicast group information for the group with the
specified IP address.
specified IP address.
hardware
Display MLD snooping hardware IP multicast information
retry [local | remote
[count]
[count]
Display MLD snooping retry information:
•
(Optional) local—Display local retry entries.
•
(Optional) remote—Display remote retry entries.
•
(Optional) count—Display the retry count.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(53)SE2
This command was introduced.