Cisco 3560x-24p 参考指南
2-86
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
cisp enable
cisp enable
Use the cisp enable global configuration command to enable Client Information Signalling Protocol
(CISP) on a switch so that it acts as an authenticator to a supplicant switch.
(CISP) on a switch so that it acts as an authenticator to a supplicant switch.
cisp enable
no cisp enable
Syntax Description
Defaults
There is no default setting.
Command Modes
Global configuration
Command History
Usage Guidelines
The link between the authenticator and supplicant switch is a trunk. When you enable VTP on both
switches, the VTP domain name must be the same, and the VTP mode must be server.
switches, the VTP domain name must be the same, and the VTP mode must be server.
When you configure VTP mode, to avoid the MD5 checksum mismatch error, verify that:
•
VLANs are not configured on two different.switches, which can be caused by two VTP servers in
the same domain.
the same domain.
•
Both switches have the different configuration revision numbers.
Examples
This example shows how to enable CISP:
switch(config)# cisp enable
Related Commands
cisp enable
Enable CISP.
Release
Modification
12.2(53)SE2
This command was introduced.
Command
Description
profile
Configures a profile on a supplicant switch.
Displays CISP information for a specified interface.