Cisco 3560x-24p 参考指南
2-418
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
nmsp
nmsp
Use the nmsp global configuration command to enable Network Mobility Services Protocol (NMSP) on
the switch. Use the no form of this command to return to the default setting.
the switch. Use the no form of this command to return to the default setting.
nmsp {enable | {notification interval {attachment | location} interval-seconds}}
no nmsp {enable | {notification interval {attachment | location} interval-seconds}}
Syntax Description
Defaults
NMSP is disabled.
Command Modes
Global configuration
Command History
Usage Guidelines
Use the nmsp global configuration command to enable the switch to send NMSP location and
attachment notifications to a Cisco Mobility Services Engine (MSE).
attachment notifications to a Cisco Mobility Services Engine (MSE).
Examples
This example shows how to enable NMSP on a switch and set the location notification time to 10
seconds:
seconds:
Switch(config)# nmsp enable
Switch(config)# nmsp notification interval location 10
Related Commands
enable
Enable the NMSP features on the switch.
notification interval
Specify the NMSP notification interval.
attachment
Specify the attachment notification interval.
location
Specify the location notification interval.
interval-seconds
Duration in seconds before a switch sends the MSE the location or
attachment updates. The range is 1 to 30; the default is 30.
attachment updates. The range is 1 to 30; the default is 30.
Release
Modification
12.2(53)SE2
This command was introduced.
Command
Description
Clears the NMSP statistic counters.
Suppresses reporting attachment information from a specified
interface.
interface.
Displays the NMSP information.