Cisco 3560x-24p 参考指南

Use the remote command privileged EXEC command to monitor all or specified stack members.

remote command {all | stack-member-number} LINE

This command is supported only on Catalyst 3750-X switches.

Privileged EXEC

The commands (such as debug, show, or clear) you use in the LINE command-to-execute string apply 
to a specific stack member or to the switch stack.

This example shows how to execute the undebug command on the switch stack:

Switch(config)# remote command all undebug all

Switch :1 : 

------------ 

All possible debugging has been turned off 

Switch :5 : 

------------ 

All possible debugging has been turned off 

Switch :9 : 

------------ 

All possible debugging has been turned off 

This example shows how to execute the debug udld event command on stack member 5:

Switch(config)# remote command 5 undebug all

Switch :5 : 

------------ 

UDLD events debugging is on 

Apply to all stack members.

Specify the stack member. The range is 1 to 9.

Specify the command to execute.

12.2(53)SE2

This command was introduced.