Cisco 3560x-24p 参考指南
2-527
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show class-map
show class-map
Use the show class-map user EXEC command to display quality of service (QoS) class maps, which
define the match criteria to classify traffic.
define the match criteria to classify traffic.
show class-map [class-map-name] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show class-map command:
Switch> show class-map
Class Map match-all videowizard_10-10-10-10 (id 2)
Match access-group name videowizard_10-10-10-10
Class Map match-any class-default (id 0)
Match any
Class Map match-all dscp5 (id 3)
Match ip dscp 5
Related Commands
class-map-name
(Optional) Display the contents of the specified class map.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(53)SE2
This command was introduced.
Command
Description
Creates a class map to be used for matching packets to the class
whose name you specify.
whose name you specify.
Defines the match criteria to classify traffic.