Cisco 3560x-24p 参考指南
2-26
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
authentication event
authentication event
Use the authentication event interface configuration command to set the actions for specific
authentication events on the port.
authentication events on the port.
authentication event {[linksec] fail [action [authorize vlan vlan-id | next-method] {| retry {retry
count}]} { no-response action authorize vlan vlan-id} {server {alive action reinitialize} |
{dead action [authorize | reinitialize vlan vlan-id]}}
{dead action [authorize | reinitialize vlan vlan-id]}}
Syntax Description
Defaults
No event responses are configured on the port.
Command Modes
Interface configuration
Command History
action
Configure the required action for an authentication event.
alive
Configure the authentication, authorization, and accounting (AAA) server
alive actions.
alive actions.
authorize
Authorize the port.
dead
Configure the AAA server dead actions.
fail
Configure the failed-authentication parameters.
linksec fail action See the
command.
next-method
Move to next authentication method.
no-response
Configure the non-responsive host actions.
reinitialize
Reinitialize all authorized clients
retry
Enable retry attempts after a failed authentication.
retry count
Number of retry attempts from 0 to 5.
server
Configure the actions for AAA server events.
vlan
Specify the authentication-fail VLAN from 1 to 4094.
vlan-id
VLAN ID number from 1 to 4094.
Release
Modification
12.2(53)SE2
This command was introduced.