Cisco 3560x-24p 参考指南
2-579
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show etherchannel
show etherchannel
Use the show etherchannel user EXEC command to display EtherChannel information for a channel.
show etherchannel [channel-group-number {detail | port | port-channel | protocol | summary}]
{detail | load-balance | port | port-channel | protocol | summary} [ | {begin | exclude |
include} expression]
include} expression]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
If you do not specify a channel-group, all channel groups are displayed.
In the output, the Passive port list field is displayed only for Layer 3 port channels. This field means that
the physical port, which is still not up, is configured to be in the channel group (and indirectly is in the
only port channel in the channel group).
the physical port, which is still not up, is configured to be in the channel group (and indirectly is in the
only port channel in the channel group).
Note
Layer 3 port channels are not supported when the switch is running the LAN base feature set.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
are not displayed, but the lines that contain Output are displayed.
channel-group-number
(Optional) Number of the channel group. The range is 1 to 48.
detail
Display detailed EtherChannel information.
load-balance
Display the load-balance or frame-distribution scheme among ports in the
port channel.
port channel.
port
Display EtherChannel port information.
port-channel
Display port-channel information.
protocol
Display the protocol that is being used in the EtherChannel.
summary
Display a one-line summary per channel-group.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(53)SE2
This command was introduced.