Cisco 3560x-24p 参考指南
2-602
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show interfaces transceivers
show interfaces transceivers
Use the show interfaces transceivers privileged EXEC command to display the physical properties of
a small form-factor pluggable (SFP) module interface.
a small form-factor pluggable (SFP) module interface.
show interfaces [interface-id] transceiver [detail | dom-supported-list | module number |
properties | threshold-table] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show interfaces interface-id transceiver properties command:
Switch# show interfaces gigabitethernet1/0/1 transceiver properties
Name : Gi1/0/1
Administrative Speed: auto
Operational Speed: auto
Administrative Duplex: auto
Administrative Power Inline: enable
Operational Duplex: auto
Administrative Auto-MDIX: off
Operational Auto-MDIX: off
interface-id
(Optional) Display configuration and status for a specified physical
interface.
interface.
detail
(Optional) Display calibration properties, including high and low numbers
and any alarm information for any Digital Optical Monitoring
(DoM)-capable transceiver if one is installed in the switch.
and any alarm information for any Digital Optical Monitoring
(DoM)-capable transceiver if one is installed in the switch.
dom-supported-list
(Optional) List all supported DoM transceivers.
module number
(Optional) Limit display to interfaces on module on the switch. The range
is 1 to 9. This option is not available if you entered a specific interface ID.
is 1 to 9. This option is not available if you entered a specific interface ID.
properties
(Optional) Display speed, duplex, and inline power settings on an interface.
threshold-table
(Optional) Display alarm and warning threshold table
| begin
(Optional) Display begins with the line that matches the expression
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(53)SE2
This command was introduced.