Cisco 3560x-24p 参考指南
2-628
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show ip source binding
show ip source binding
Use the show ip source binding user EXEC command to display the IP source bindings on the switch.
show ip source binding [ip-address] [mac-address] [dhcp-snooping | static] [interface
interface-id] [vlan vlan-id] [ | {begin | exclude | include} expression]
Note
This command is available only if your switch is running the IP services feature set.
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
The show ip source binding command output shows the dynamically and statically configured bindings
in the DHCP snooping binding database. Use the show ip dhcp snooping binding privileged EXEC
command to display only the dynamically configured bindings.
in the DHCP snooping binding database. Use the show ip dhcp snooping binding privileged EXEC
command to display only the dynamically configured bindings.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show ip source binding command:
Switch> show ip source binding
MacAddress IpAddress Lease(sec) Type VLAN Interface
-------------- --------------- ---------- ------------- ---- --------------------
00:00:00:0A:00:0B 11.0.0.1 infinite static 10 GigabitEthernet1/0/1
00:00:00:0A:00:0A 11.0.0.2 10000 dhcp-snooping 10 GigabitEthernet1/0/1
ip-address
(Optional) Display IP source bindings for a specific IP address.
mac-address
(Optional) Display IP source bindings for a specific MAC address.
dhcp-snooping
(Optional) Display IP source bindings that were learned by DHCP
snooping.
snooping.
static
(Optional) Display static IP source bindings.
interface interface-id
(Optional) Display IP source bindings on a specific interface.
vlan vlan-id
(Optional) Display IP source bindings on a specific VLAN.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(53)SE2
This command was introduced.