Cisco 3560x-24p 参考指南
2-647
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show ipv6 route updated
show ipv6 route updated
Use the show ipv6 route updated command in user EXEC command to display the current contents of
the IPv6 routing table.
the IPv6 routing table.
show ipv6 route [protocol] updated [boot-up] {hh:mm | day{month [hh:mm]} [{hh:mm |
day{month [hh:mm]}] [ | {begin | exclude | include} expression]
Note
This command is not supported on switches running the LAN base feature set.
Syntax
Description
Command Modes
Privileged EXEC
Command History
protocol
(Optional) Displays routes for the specified routing protocol using any of
these keywords:
these keywords:
•
bgp
•
isis
•
ospf
•
rip
or displays routes for the specified type of route using any of these keywords:
•
connected
•
local
•
static
•
interface interface id
boot-up
Display the current contents of the IPv6 routing table.
hh:mm
Enter the time as a 2-digit number for a 24-hour clock. Make sure to use the
colons (:). For example, enter 13:32
colons (:). For example, enter 13:32
day
Enter the day of the month. The range is from 1 to 31.
month
Enter the month in upper case or lower case letters. You can enter the full
name of the month, such as January or august, or the first three letters of the
month, such as jan or Aug.
name of the month, such as January or august, or the first three letters of the
month, such as jan or Aug.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(53)SE2
This command was introduced.