Cetacea Sound cart-ens-903 快速安装指南

下载
页码 2
 
 
 
QUICK START GUIDE 
 
CART SURROUND ENSEMBLE 
Model No. “CARTENS-903”
 
 
Connections and Set-up 
 
1.  There are 3 mini-jack (3.5mm) inputs on the base of the speaker for 
mixing multiple sources of sound.  
 
2.  The CSENS speakers require power from the Cetacea Sound Corp 
approved “Power Adapter/Conditioner”. Plug the power adapter into a 
suitable source of 110/220v power. Plug in the source, DVD, projector 
or personal computer first and then plug the small 5.5mm barrel 
connector of the power supply into the base of the speaker where 
indicated
. (It will only fit in one location.) 
 
3.  The speaker does not have any internal volume control or “ON-OFF” 
controls; the power supply cable is the On-Off control. Therefore, plug 
the source cable in first and make sure the source volume is first turned 
down to an acceptable level. 
 
Note: This speaker uses “conditioned” power. Use of unapproved 
power adapters will invalidate the warranty. 
 
4. 
Once inputs are established and the power supply is connected, turn 
on the music. Be sure to use a high quality recording to fully appreciate 
the awesome sound of these speakers. Once you are satisfied with the 
sound, notice the source level so you can repeat this same sound stage 
with the audience in the room. The larger the audience the better it 
sounds! 
 
In order to obtain maximum enjoyment from this exciting new audio 
system, visit our web site and print copies of our application guides, room 
drawings and spec sheets to learn how to make a lasting impression with 
your audience. 
 
The spec sheet for this product is labeled CEIL-903, page 1 and page 2 
on our literature page. 
If you have questions, call Technical Support at 800-556-1922. 
www.cetaceasound.com