Raymarine a50 用户指南
32
A-Series display - User reference manual
2. Using the trackpad move the cursor to the position where you
want the waypoint.
3. Press the WAYPOINT AT CURSOR softkey.
4. Press OK.
4. Press OK.
To place a waypoint at your boat’s position:
1. Press the WPTS/MOB button.
2. Press the WAYPOINT AT VESSEL softkey.
3. Press OK.
Note: If the system cannot determine your position, a warning is
2. Press the WAYPOINT AT VESSEL softkey.
3. Press OK.
Note: If the system cannot determine your position, a warning is
displayed and the waypoint cannot be placed.
To place a waypoint using coordinates:
1. Press the WPTS/MOB button.
2. Press the WAYPOINT AT LAT/LON softkey.
3. Set the position for the new waypoint.
4. Press OK.
2. Press the WAYPOINT AT LAT/LON softkey.
3. Set the position for the new waypoint.
4. Press OK.
Navigating to waypoints
This section explains how to start and stop navigating to a waypoint.
When you navigate to a waypoint, the data is sent to your autopilot.
The waypoint to which you are navigating is the active waypoint.
When you navigate to a waypoint, the data is sent to your autopilot.
The waypoint to which you are navigating is the active waypoint.
Note: Autopilots must be compatible and connected to the A-
Series display as shown in the installation guide.
For detailed information on navigating with waypoints, see
.
To navigate to a waypoint
1. Highlight the waypoint.
2. Press the GOTO WAYPOINT softkey.
2. Press the GOTO WAYPOINT softkey.
or
1. Press either the WPTS/MOB button or GOTO softkey.
2. Press the GOTO WAYPOINT OPTIONS softkey.
3. Select the appropriate waypoint from the list.
4. Press GOTO WAYPOINT.
2. Press the GOTO WAYPOINT OPTIONS softkey.
3. Select the appropriate waypoint from the list.
4. Press GOTO WAYPOINT.
To stop navigating to a waypoint
1. Highlight the waypoint.
2. Press the STOP GOTO softkey.
2. Press the STOP GOTO softkey.
or
1. Press the WPTS/MOB button.
2. Press the GOTO WAYPOINT OPTIONS softkey.
3. Press the STOP GOTO softkey.
2. Press the GOTO WAYPOINT OPTIONS softkey.
3. Press the STOP GOTO softkey.
D8285_1
81314-1_A Series Reference Guide.book Page 32 Thursday, August 28, 2008 9:23 AM