Gateway 310 aafes 用户指南
172
Chapter 11: Upgrading Your Computer
www.gateway.com
3
Lift the drive release latch up and slide the hard drive out of the hard drive
bay.
bay.
4
Set the jumpers on the drive. See the drive documentation for further
instructions.
instructions.
5
Slide the new drive in the drive bay. Push firmly until the drive release
latch locks the hard drive into place.
latch locks the hard drive into place.
6
Reconnect the drive cables using your notes from
. The red-striped
edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1
on the drive (typically on the side closest to the power supply connection).
See the drive documentation for further instructions.
on the drive (typically on the side closest to the power supply connection).
See the drive documentation for further instructions.
7
Replace the side panel following the instructions in
.